Ricoh FT8680 Service Manual page 351

ARDF
12.15 STOPPER POSITION ADJUSTMENT
[A]
Stopper Position Adjustment
1. Remove the feed unit left cover [A] (3 screws) and the entrance upper
cover [B] (2 screws).
2. Loosen the screw [C] and slide the stopper [D] to the front of the machine.
3. Then gradually slide the stopper [D] to the rear of the machine until it
slightly touches the separation tab bracket [E].
4. Retighten the screw [C].
[B]
A171R679.img
[C]
[D]
[E]
5-122
31 July 1995
[D]
[E]
A171R648.img