Ptx10003 Installation Overview; Overview Of Installing The Ptx10003 - Juniper PTX10003-80C Hardware Manual

PTX10003 Installation Overview

IN THIS SECTION

Overview of Installing the PTX10003 | 99

PTX10003 Installation Safety Guidelines | 100
Overview of Installing the PTX10003
You can mount a PTX10003:
Flush with the front of a 19-in. four-post rack. Use the mounting brackets attached to sides of the
PTX10003.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Recessed mounting is primarily used in
enclosed cabinets.
To install and connect a PTX10003:
1. Unpack the PTX10003 and verify the components received. See
PTX10003" on page
2. Mount the PTX10003 in a rack. See
3. For installations that require a separate grounding conductor to the chassis, follow the instructions in
"Connecting the PTX10003 to Ground" on page
4. Connect the PTX10003 to power. Depending on your configuration, follow the instructions in
"Connecting AC Power to the PTX10003" on page
5. Connect the PTX10003 to a management console for initial configuration. See
PTX10003-80C to External Devices" on page
6. Initially configure the Junos OS Evolved software following the instructions in
Software Configuration for the PTX10003" on page
101.
"Unpacking and Mounting the PTX10003" on page
120.
"Unpacking and Mounting the
110.
112.
123.
101.
"Connecting the
"Performing the Initial
99