Juniper PTX10003-80C Hardware Manual page 118

12. Reattach the cable manager bracket that you removed in
Figure 44 on page 119.
Figure 44: Reattaching the Cable Manager Bracket
13. Close the cable manager latch to hold the power cables in place. See
Figure 46 on page 120.
WARNING:
or drape where people could trip over them.
Figure 45: Closing the Cable Manager Latch (PTX10003-160C)
Ensure that the power cables do not block access to device components
Step6 and tighten the thumb screw. See
Figure 45 on page 119
119
and