Packing A Ptx10003 Component For Shipping - Juniper PTX10003-80C Hardware Manual

5. Place the PTX10003 in an antistatic bag.
6. Place the PTX10003 in the shipping carton.
7. Place the packing foam on top of and around the PTX10003.
8. If you are returning accessories or field-replaceable units with the PTX10003, pack them as instructed
in "Packing a PTX10003 Chassis or Component for Shipping" on page
9. Close the top of the cardboard shipping box and seal it with packing tape.
10. Write the return materials authorization (RMA) number on the exterior of the box to ensure proper
tracking. See "Contacting Customer Support to Obtain Return Material Authorization" on page 170
instructions on obtaining an RMA number.

Packing a PTX10003 Component for Shipping

CAUTION:
separate boxes if they do not fit together on one level in the shipping box.
Here's how to pack a PTX10003 component for shipping:
1. Place individual field-replaceable units in antistatic bags.
2. Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
3. Close the top of the cardboard shipping box and seal it with packing tape.
4. Write the RMA number on the exterior of the box to ensure proper tracking. See
Support to Obtain Return Material Authorization" on page 170
number.
Do not stack PTX10003 components. Return individual components in
171.
"Contacting Customer
for instructions on obtaining an RMA
172
for