Administering The Upgrade - Avaya G350 Installing And Upgrading

Upgrading IP phone configuration and firmware files
SIP:
●
SIP phone: 4602 SIP
●
4602SW
●
4602SW+
●
4610SW
●
4620SW
●
4621SW
●
IP telephones not supported by the local TFTP Server feature
4630
●
4630SW
●
Note:
If you have an S8300 installed in the G350, you can alternatively upgrade IP
Note:
phones using the CM web pages.
Note:
You can also upgrade IP phones using Avaya IW or GIW, as described in
Note:
Appendix C: Running the Avaya Installation Wizard (Avaya IW)
Appendix D: Running the Gateway Installation Wizard (GIW)
Note:
An alternative tool, the Avaya Software Update Manager (4.0 or higher), is a GUI
Note:
application that greatly simplifies the IP phone upgrade process, avoiding the
need to know the file names of the necessary upgrade files for each IP phone
type. For further information, see Avaya Software Update Manager User Guide,
14-300168.
Note:
The IP address of the TFTP server is the PMI.
Note:

Administering the upgrade

When using supported IP phones with the G350, the IP phones require the downloading of the
settings file and the upgrade scripts. These files are stored in the script banks in NVRAM and
are preserved in the event of a reset or power failure. There are two script banks.
96 Installation and Upgrades for the Avaya G350 Media Gateway
on page 137 and
on page 127.