Step 2: Removing The Installation Equipment - Avaya G350 Installing And Upgrading

After installation
Table 2: IP addresses and controllers
Primary media
gateway controller
S8300
S8400
S8500
S8510
S8700
S8710
S8720
S8730
*. You cannot upgrade the S8700 to CM5.0

Step 2: Removing the installation equipment

Remove all equipment that you used to assist you in the installation process. This may include
the CD-ROM drive, the software upgrade CDs, the laptop computer, and the modem (for
installations without an S8300X module only).
Note:
If you have an S8300X Server module installed in the G350, leave the modem
Note:
connected to enable reporting of alarms to remote locations.
74 Installation and Upgrades for the Avaya G350 Media Gateway
IP addresses to configure
The IP address of the primary S8300
The IP address of the S8400's C-LAN or the IP address
of an Ethernet port on the S8400 configured for
processor Ethernet connections
The IP address of the S8500's C-LAN or the IP address
of an Ethernet port on the S8500 configured for
processor Ethernet connections
The IP address of the S8510's C-LAN or the IP address
of an Ethernet port on the S8510 configured for
processor Ethernet connections
*
The IP address of the S8700's C-LAN and the IP
address of alternate C-LAN boards connected to the
S8700 (Server A LAN, Server B LAN)
The IP address of the S8710's C-LAN and the IP
address of alternate C-LAN boards connected to the
S8710
The IP address of the S8720's C-LAN and the IP
address of alternate C-LAN boards connected to the
S8720
The IP address of the S8730's C-LAN and the IP
address of alternate C-LAN boards connected to the
S8730