Connecting a computer
You can connect a computer to any of the following:
A switch connected to the G350
●
The data port of an IP telephone connected to a PoE port on the G350
●
One of the following data ports on the MM314 media module, if installed:
●
- 24 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet
(PoE)
- The copper Gigabit port, labelled 51
One of the following data ports on the MM316 media module, if installed:
●
- 40 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet
(PoE)
- The copper Gigabit port, labelled 51
One of the following ports on the front panel of the Avaya G350 Media Gateway chassis:
●
- The ETH LAN ports
- The ETH WAN ports
The Console port on the front panel of the Avaya G350 Media Gateway chassis
●
To connect the computer to the ETH LAN, or ETH WAN, Console, SERVICES, MM314 ports, or
MM316 ports, a network cable with an RJ-45 connector must be useda straight network cable
with an RJ-45 connector or a crossover cable with an RJ-45 connector must be used.
Step 1: Connecting data and voice devices
Issue 7 November 2009
45