Installing the contact closure
1. Follow the installation instructions in the Avaya Partner Contact Closure Adjunct
Installation Instructions leaflet to install the Contact Closure and connect the auxiliary
devices that will be activated and deactivated by the Contact Closure relays.
2. Note which device is connected to each relay. You will need this information for
configuration.
3. Connect the Avaya Partner Contact Closure adjunct box to the CC port on the G350 front
panel. Use a 24 gauge minimum telephone wire, no longer than 200 ft, with a standard four
wire RJ-11 connector.
Step 5: Installing the Avaya Partner Contact Closure Adjunct
Issue 7 November 2009
59