Chapter 12
1-2) Remove the manual feed unit [3].
- screw [1]
- stopper plate [2]
F-12-33
2) Remove the manual feed unit cover.
2-1) Remove the manual feed unit cover [4].
- 2 screw [1]
- 3 claws [2]
- 3 snap-ons [3]
[2]
F-12-34
12-26
12.5.2 Developing Drive Unit
12.5.2.1 Preparation for Removing the
1) Remove the rear fan cover.(page
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear upper cover.(page 12-
22)Reference[Removing the Rear Upper Cover]
3) Remove the rear left cover (upper).(page 12-
23)Reference[Removing the Rear Left Cover
(Upper)]
[4]
4) Remove the main controller box cover.
5) Remove the main controller box.(page 5-
23)Reference[Removing the Main Controller
Box]
6) Remove the DC controller PCB cover.
7) Remove the DC controller box2.(page 12-
31)Reference[Removing the DC Controller
Box2]
8) Remove the DC controller box1.(page 12-
32)Reference[Removing the DC Controller
Box1]
[1]
9) Remove the high-voltage unit1.(page 12-
27)Reference[Removing
Unit1]
F-12-35
Developing Drive Unit
12-
the
High-Voltage