Developing Unit - Canon imagePRESS C1 P Service Manual

7.7 Developing Unit

7.7.1 Developing Unit Configuration
imagePRESS C1 P / imagePRESS C1
This machine has four developing assemblies (Y, M, C, Bk), which are stored in the developing rotary.
Each developing assembly has the same configuration. The toner bottles supply toner with different components (pigments).
The configuration and function of the developing assembly are shown below.
Configuration
[1] Developing cylinder
[2] Blade
[3] Developer stirring screw
7.7.2 Developing Unit Configuration
imagePRESS C1+ (Printer) / imagePRESS C1+
This machine has 5 developing assemblies (L, Y, M, C, Bk), which are stored in the developing rotary.
Each developing assembly has the same configuration. The toner bottles supply toner with different components (pigments).
The configuration and function of the developing assembly are shown below.
Configuration
[1] Developing cylinder
[2] Blade
[3] Developer stirring screw
7.7.3 Developing Assembly Drive Control
imagePRESS C1 P / imagePRESS C1
The developing assembly consists of the developing cylinder, developing stirring screw A, and developing stirring screw B, applying driving load.
When the developing motor (M3) and developing clutch (CL1) are turned on, driving load is communicated.
T-7-13
Function
Stores the developer (toner/carrier).
Forms an even developer layer on the developing cylinder.
Stirs the developer and supplies it to the developing cylinder.
F-7-63
T-7-14
Function
Stores the developer (toner/carrier).
Forms an even developer layer on the developing cylinder.
Stirs the developer and supplies it to the developing cylinder.
F-7-64
[2]
[1]
[3]
[2]
[1]
[3]
Chapter 7
0012-7123
0020-4168
0012-7125
7-49