Table of Contents
Advertisement
E1437A User's Guide
Replacing Assemblies
5
Using your hand, remove the two captive screws.
6
Using a T-10 torx driver, remove the two screws that attach the two logo bases and the
two L-blocks to the front panel. Note: there is a left and a right logo base. Also notice the
orientation of the two L-blocks. This will be important when you reassemble the front panel.
L-block
8-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
L-block
Lef t logo base
Right logo base
Advertisement
Table of Contents
