E1437A User's Guide
Module Description
Front Panel Description
LED lights w hen the module is
being accessed via the VXI backplane
Sync extenders are used to extend the
sync line from one mainframe or
module to another. It is an SM B connector
for ECL levels and must terminated in
50 ohms at each end of the chain
This is BNC input for voltage steps
w hich can be used to trigger the
acquisition of a block of data
6-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LED lights w henever the input range is
exceeded, producing an overload in the ADC
Clock Extenders are used to extend the
sample clock from one mainframe or
module to another. It is an SM B connector
for ECL levels and must terminated in
50 ohms at each end of the chain
This is a BNC input for TTL, ECL, or sine
w ave signals w hich can be used as the
ADC sample clock
This is the main input to the ADC. It is a
psuedo-floating single-ended input
terminated into 50 ohms