Agilent Technologies E1437A User Manual page 136

E1437A
ASCII Overview and Commands
DATA:SETUP
Sets all format and data output flow parameters. This description also
includes information on the following commands which set or query the
format and flow parameters individually:
DATA:APPEND:STATUS appends status information to a data block.
DATA:APPEND:STATUS? gets the append status state
DATA:BLOCKSIZE determines the size of the output data block.
DATA:BLOCKSIZE? gets the output data block size
DATA:MODE selects block mode or continuous mode.
DATA:MODE? gets the data mode
DATA:PORT selects VME bus or local bus output port.
DATA:PORT? gets the output port designation
DATA:RESOLUTION selects 16 or 32 bits data resolution.
DATA:RESOLUTION? gets the data resolution
DATA:TYPE selects real or complex output data.
DATA:TYPE? gets output data type
Command syntax:
DATA:SETUP <type>,<resolution>,<mode>,<blocksize>,<append>,<port>
type::=01
resolution::=01
mode::=01
blocksize <numeric>
append::=01
port::=01
DATA:APPEND:STATUS 0
DATA:BLOCKSIZE <numeric>
DATA:MODE 01
DATA:PORT 01
DATA:RESOLUTION 01
DATA:TYPE 01
Query syntax:
DATA:APPEND:STATUS?
DATA:BLOCKSIZE?
DATA:MODE?
DATA:PORT?
DATA:RESOLUTION?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
numeric::= 1 to memorysize/2
numeric::= 1 to memorysize/2
DATA:SETUP
command/query
command/query
5-13