Table of Contents
Advertisement
E1437A User's Guide
Replacing Assemblies
To remove the front panel
1
Remove covers, see "To remove the top and bottom covers". Using a T-8 torx driver, remove
the two screws that attach the handles to the assembly. NOTE: be sure to label the two handles,
which are different from each other. This will aid you in reassembling the module.
2
Remove the 4 nuts and washers from the gold connectors as shown, using a 1/4" nut driver.
8-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
