Table of Contents
Advertisement
3
Remove the 3 nuts and washers from the BNC connectors as shown, using a 9/16" nut driver.
Slide the front panel off the main assembly.
4
Note: steps 4, 5, and 6 are only necessary if you need to replace the front panel or any of
it's components. Using an X-acto knife, gently pry the labels from the two keys.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
E1437A User's Guide
Replacing Assemblies
8-9
Advertisement
Table of Contents
