Erx-310 Router Specifications - Juniper E Series Hardware Manual

ERX-310 Router Specifications

Table 18: ERX-310 Router Specifications
Category
Weight: DC model
Chassis only
Chassis, fully configured
Weight: AC model
Chassis with single power supply
Chassis with dual power supply
Chassis with single power supply, fully configured
Chassis with dual power supply, fully configured
Dimensions
Environmental Requirements
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Heat Dissipation
DC Input
Voltage
Current
Power
Redundancy (input power)
AC Input
Power required
AC line frequency
Power
Specification
Weights are approximate.
25.5 lb (11.57 kg)
36 lb (16.33 kg)
Weights are approximate.
27.5 lb (12.47 kg)
31.5 lb (14.29 kg)
38 lb (17.24 kg)
42 lb (19.05 kg)
5.2 (H) x 19 (W) x 16 (D) inches; 13.21 x 48.26 x 40.64 cm
NEBS GR-63-CORE compliant
Long term: 41° to 104° F (5° to 40° C)
Short term: 23° to 122° F (–5° to 50° C)
Long term: 5% to 85% (noncondensing)
Short term: 5% to 95% (noncondensing)
–40° to 158° F (–40° to +70° C), 95% relative humidity
5% to 95% (noncondensing)
500 W, 1706 BTU/hour maximum
–40 to –72 VDC
NOTE: If the voltage rises above –40 VDC, the system will
power off. The system will not power on again until the input
voltage reaches –43 +/– 0.5 VDC.
9 A @ –48 VDC
500 W maximum
2 independent line feeds
90-265 VAC @ ~5 A
50-60 Hz
500 W
ERX-310 Router Specifications
System Specifications
119