Juniper E Series Hardware Manual page 130

ERX 7.0.x Hardware Guide
Table 16: ERX-14xx Models Specifications (continued)
Category
Power
Redundancy (input power)
Space Requirements
Airflow
NEBS Certification
Safety Agency Certification
114
ERX-14xx Models Specifications
Specification
2400 W maximum
2 independent line feeds
3 feet (90 cm) behind router or rack
No space requirements for sides of units or rack
Do not block air vents on front or back of the router
An integral air plenum directs router's exhaust air
below the router and out the back. See Figure 54.
SR-3580 (FD-15): Network Equipment Building
System (NEBS) Criteria Levels, Issue 1, November
1995
GR-63–CORE: Network Equipment Building System
(NEBS) Requirements: Physical Protection, Issue 2,
April 2002
GR-1089 (LSSGR, FD-15): Electromagnetic
Compatibility and Electrical Safety - Generic Criteria
for Network Telecommunications Equipment, Issue
2, Revision 1, February 1999
AS/NZS 60950:2000 Safety of Information
Technology Equipment
CAN/CSA-C22.2, No. 60950-1–03, First Edition,
Information Technology Equipment - Safety - Part
1: General Requirements
EN60825-1, Safety of Laser Products - Part 1:
Equipment Class, Requirements, and User's Guide
(2001)
EN 60950-1:2001, First Edition, Information
Technology Equipment - Safety - Part 1: General
Requirements
IEC 60950-1(2001-10) Ed. 1.0 Information
Technology Equipment - Safety - Part 1: General
Requirements
Low Voltage Directive (73/23/EEC)
UL 60950-1, First Edition, Information Technology
Equipment - Safety - Part 1: General Requirements