Juniper E Series Hardware Manual page 13

Table 1: Notice Icons
Icon
Table 2 defines text conventions used in this guide and the command syntax
conventions used primarily in the JUNOSe Command Reference Guide. For more
information about command syntax, see the JUNOSe System Basics Configuration
Guide, Chapter 2, Command Line Interface.
Table 2: Text and Syntax Conventions
Convention
Text Conventions
Bold typeface
Bold sans serif typeface
Fixed-width typeface
Italic typeface
+ (plus sign) linking key names
Syntax Conventions in the Command Reference Guide
Plain typeface
Italic typeface
| (pipe symbol)
[ ] (square brackets)
Meaning
Informational note
Caution
Warning
Description
Represents names of commands and
keywords in text.
Represents text that you must type.
Represents output on the terminal
screen.
Emphasizes words.
Identifies variables.
Identifies chapter, appendix,
and book names.
Indicates that you must press two or
more keys simultaneously.
Represents keywords.
Represents variables.
Indicates a choice between the
keywords or variables on either side of
the symbol. (Specifying a choice can be
either optional or required.)
Enclose an optional choice of a single
keyword or variable.
About This Guide
Description
Indicates important features or
instructions.
Indicates a situation that might result in
loss of data or hardware damage.
Alerts you to the risk of personal injury
or death.
Examples
Issue the clock source
command.
Specify the keyword exp-msg.
host1(config)#traffic class low-loss1
host1#show ip community list
Community standard list 1
permit 0:100 0:200 0:300
There are two levels of access,
user and privileged .
clusterId , ipAddress .
Appendix A, System
Specifications.
Press Ctrl+b.
terminal length
mask , accessListName
diagnostic | line
[ internal | external ]
Documentation Conventions
xiii