Maintaining E-Series Routers; Required Tools And Items - Juniper E Series Hardware Manual

Chapter 8

Maintaining E-series Routers

Required Tools and Items

This chapter lists the tools, items, and steps needed for installing and uninstalling
E-series components. Other maintenance procedures must be performed by an
authorized Juniper Networks technician.
This chapter contains the following sections:
Required Tools and Items on page 81
Storing Modules and Components on page 82
Cleaning the System on page 82
Upgrading NVS Cards on SRP Modules on page 83
Upgrading Memory on SRP Modules on page 86
Replacing SFPs on GE I/O Modules on page 89
Replacing Fan Trays on page 93
Installing a Cable-Management Bracket on ERX-7xx Models on page 96
You will need the following tools and other items to replace E-series components.
Flathead and Phillips screwdrivers
Insulated adjustable wrench
Antistatic wrist strap
Antistatic bags (or other protective packaging to hold components)
Plastic boots or other protective cover for fiber-optic SC and LC connectors

Required Tools and Items

81