Led Identification - Juniper E Series Hardware Manual

Routing platforms
Hide thumbs Also See for E Series:
Table of Contents

Advertisement

with LED activity so that you can easily detect and correct a module-related
problem with minimal or no system downtime.

LED Identification

The system's modules have two sets of status LEDs. The top set indicates
overall router and module status. The bottom set indicates module-specific
status, such as port status (line modules) or fan status (SRP module).
The number next to the port status LED on a line module corresponds to the
number of the port on the I/O module. Some line modules have more port
status LEDs than the number of ports on the I/O module. In these cases, only
the LEDs for the corresponding ports on the I/O modules are active.
For example, an OCx/STMx line module can pair with either an OC3-4 or
an OC12/STM4 I/O module. Consequently, the line module has four port
status LEDs for OC3/STM1 operation. However, only the top set of port
status LEDs is active during OC12/STM4 operation.
Table 11 shows the functions of the module and port status LEDs.
Table 11: LED Identification and Activity Descriptions
LED Location
LED Label
OK
All modules
FAIL
ONLINE
REDUNDANT
All modules
SRP module
POWER A OK
POWER B OK
FAN OK
FAN FAIL
LINK
ACTIVITY
LED Indicator
LED Color
Green
Module status
Module status
Red
Module status
Green
Green
Redundancy
NOTE: The REDUNDANT LED on the cOCx/STMx, FE-8, GE/FE, HSSI, OCx/STMx,
and X.21/V.35 line modules is nonfunctional.
Power
Green
Power
Green
Fan
Green
Fan
Red
NOTE: When the LED alternates between OK and FAIL at ten-second intervals, a
noncritical fan failure exists.
Green
Ethernet
Green
Ethernet
Understanding Status LEDs to Troubleshoot
Troubleshooting
OFF to ON
ON to OFF
Self-test passed
Failure detected
Failure detected
Diagnostic test
running
Module online
Module offline
See "Redundancy Status" on page 109.
Power online on
Power off
source A
Power online on
Power off
source B
Fan online
Critical fan failure
Critical fan failure
Fan online
Ethernet link up
Ethernet link
down
Blinks when
No Ethernet traffic
Ethernet traffic
on link
on link
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents