Broadcast Storm Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Broadcast Storm Commands

Use these commands to limit the number of broadcast, multicast and destination lookup failure (DLF)
packets the Switch receives per second on the ports.
Note: Broadcast storm control implementation differs across Switch models.
• Some models use a single command (bmstorm-limit) to control the combined rate of broadcast,
multicast and DLF packets accepted on Switch ports.
• Other models use three separate commands (broadcast-limit, multicast-limit, dlf-limit) to
control the number of individual types of packets accepted on Switch ports.
See Section 12.2 on page 47
12.1 Command Summary
The following table describes user-input values available in multiple commands for this feature.
Table 28 User-input Values: broadcast-limit, multicast-limit & dlf-limit
COMMAND
pkt/s
The following section lists the commands for this feature.
Table 29 Command Summary: storm-control, bmstorm-limit, and bstorm-control
COMMAND
show interfaces config <port-
list> bstorm-control
storm-control
no storm-control
interface port-channel <port-
list>
bmstorm-limit
bmstorm-limit <rate>
no bmstorm-limit
broadcast-limit
and Section 12.3 on page 47
DESCRIPTION
Specifies the maximum number of packets per second accepted by a Switch
port.
DESCRIPTION
Displays the current settings for broadcast storm control on
the specified ports.
Enables broadcast storm control on the Switch.
Disables broadcast storm control on the Switch.
Enters subcommand mode for configuring the specified
ports.
Enables broadcast storm control on the specified port(s).
Specifies the maximum rate at which the Switch receives
broadcast, multicast, and destination lookup failure (DLF)
packets on the specified port(s).
Different models support different rate limiting incremental
steps. See your User's Guide for more information.
Disables broadcast storm control on the specified port(s).
Enables the broadcast packet limit on the specified
port(s).
Ethernet Switch CLI Reference Guide
46
C
H A P T E R
for examples.
12
M P
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13