Arp Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Use these commands to look at IP-to-MAC address mapping(s).
6.1 Command Summary
The following section lists the commands for this feature.
Table 13 arp Command Summary
COMMAND
arp aging-time <60-1000000>
arp name <name> ip <ip-address>
mac <mac-addr> vlan <vlan-id>
interface port-channel <port-
list>
arp name <name> ip <ip-address>
mac <mac-addr> vlan <vlan-id>
interface port-channel <port-
list> inactive
no arp ip <ip-address> mac <mac-
addr> vlan <vlan-id>
no arp ip <ip-address> mac <mac-
addr> vlan <vlan-id>
show ip arp
show ip arp count
clear ip arp
clear ip arp interface port-
channel <port-list>
clear ip arp ip <ip-address>

ARP Commands

DESCRIPTION
Sets how long dynamically learned ARP entries remain in
the ARP table before they age out (and must be
relearned).
Creates a static ARP entry which will not age out.
Creates a static ARP entry but disables it.
Deletes a static ARP entry from the ARP table.
Enables the specified static ARP entry.
inactive
Displays the ARP table.
Displays the number of ARP entries in the ARP table.
Removes all of the dynamic entries from the ARP table.
Removes the dynamic entries learned on the specified
port.
Removes the dynamic entries learned with the specified IP
address.
Ethernet Switch CLI Reference Guide
32
C
H A P T E R
6
M P
C 13
C 13
C 13
C 13
C 13
E 3
E 3
E 13
E 13
E 13