Tacacs+ Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Use these commands to configure external TACACS+ (Terminal Access Controller Access-Control
System Plus) servers.
88.1 Command Summary
The following section lists the commands for this feature.
Table 205 tacacs-server Command Summary
COMMAND
show tacacs-server
tacacs-server host <index> <ip>
[auth-port <socket-number>] [key
[cipher] <key-string>]
tacacs-server mode <index-
priority|round-robin>
tacacs-server timeout <1-1000>
no tacacs-server <index>
Table 206 tacacs-accounting Command Summary
COMMAND
show tacacs-accounting
tacacs-accounting timeout <1-
1000>
tacacs-accounting host <index>
<ip> [acct-port <socket-number>]
[key [cipher] <key-string>]
no tacacs-accounting <index>

TACACS+ Commands

Ethernet Switch CLI Reference Guide
C
H A P T E R
DESCRIPTION
Displays TACACS+ server settings.
Specifies the IP address of the specified TACACS+ server.
Optionally, sets the port number and key of the TACACS+
server.
index: 1 or 2.
cipher: inform the Switch that the string after the word
"cipher" is an encrypted secret. This is used in password
encryption. To encrypt the password, use the password
encryption command.
key-string: 1-32 alphanumeric characters.
Specifies the mode for TACACS+ server selection.
Specifies the TACACS+ server timeout value.
Disables TACACS+ authentication on the specified server.
DESCRIPTION
Displays TACACS+ accounting server settings.
Specifies the TACACS+ accounting server timeout value.
Specifies the IP address of the specified TACACS+
accounting server. Optionally, sets the port number and
key of the external TACACS+ accounting server.
index: 1 or 2.
cipher: inform the Switch that the string after the word
"cipher" is an encrypted secret. This is used in password
encryption. To encrypt the password, use the password
encryption command.
key-string: 1-32 alphanumeric characters.
Disables TACACS+ accounting on the specified server.
322
88
M P
E 3
C 14
C 14
C 14
C 14
M P
E 3
C 13
C 13
C 13