This chapter introduces and shows you how to configure the broadcast storm control feature.
12.1 Broadcast Storm Control Overview
Broadcast storm control limits the number of broadcast, multicast and destination lookup
failure (DLF) packets the switch receives per second on the ports. When the maximum number
of allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent
packets are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in
your network. You can specify limits for each packet type on each port.
12.2 Broadcast Storm Control Setup
Click Advanced Application, Broadcast Storm Control in the navigation panel to display
the screen as shown next.
Figure 44 Broadcast Storm Control
The following table describes the labels in this screen.
Table 31 Broadcast Storm Control
LABEL
Active
Port
Chapter 12 Broadcast Storm Control
Broadcast Storm Control
DESCRIPTION
Select this check box to enable broadcast storm control on the switch.
This field displays a port number.
VES-1616F/1624F-44 User's Guide
C
H A P T E R
12
105