ZyXEL Communications XS3800-28 Cli Reference Manual page 189

Chapter 44 Link Layer Discovery Protocol (LLDP) Commands
Remote Switch LLDP information
Table 131
LABEL
Extended TLV Info 802.1
OUI (hex value)
Port VLAN ID
DCBX Application Priority
DCBX ETS Configuration
DCBX PFC Configuration
Extended TLV Info 802.3
OUI (hex value)
Max Frame Size
DESCRIPTION
The 802.1 organizationally specific TLVs start with the 24-bit organizationally unique
identifier (OUI) and a 1 byte organizationally specific subtype followed by data. Each
organization is responsible for managing their subtypes.
This TLV displays the VLAN ID for the remote Switch.
This TLV displays the priority given to FCoE traffic on the remote Switch.
This TLV displays the willing bit, ETS capability and traffic class settings configured by ETS
on the remote Switch.
This TLV displays the willing bit, PFC capability, and enabled priority list configured by
PFC on the remote Switch.
The 802.3 organizationally specific TLVs start with the 24-bit organizationally unique
identifier (OUI) and a 1 byte organizationally specific subtype followed by data. Each
organization is responsible for managing their subtypes.
This TLV displays the maximum transmission unit (MTU) sent by the remote Switch.
Ethernet Switch CLI Reference Guide
189
(continued)