Classifier Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Use these commands to classify packets into traffic flows. After classifying traffic, policy commands
(Chapter 64 on page
network.
15.1 Command Summary
The following section lists the commands for this feature.
Table 35 Command Summary: classifier
COMMAND
show classifier [<name>]
clear classifier match-count
[<name>]

Classifier Commands

247) can be used to ensure that a traffic flow gets the requested treatment in the
DESCRIPTION
Displays classifier configuration details.
Removes the number of times all or the specified classifier rule is
applied.
Ethernet Switch CLI Reference Guide
C
H A P T E R
60
15
M P
E 3
E 3