Aaa Commands - ZyXEL Communications XS3800-28 Cli Reference Manual
Hide thumbs
Also See for XS3800-28:
- User manual (789 pages) ,
- Quick start manual (2 pages) ,
- User manual (593 pages)
Table of Contents
Advertisement
Use these commands to configure authentication, authorization and accounting on the Switch.
4.1 Command Summary
The following section lists the commands for this feature.
Table 9 aaa authentication Command Summary
COMMAND
show aaa authentication
show aaa authentication enable
aaa authentication enable
<method1> [<method2> ...]
no aaa authentication enable
show aaa authentication login
aaa authentication login
<method1> [<method2> ...]
no aaa authentication login
Table 10 Command Summary: aaa accounting
COMMAND
show aaa accounting
show aaa accounting update
aaa accounting update periodic
<1-2147483647>
no aaa accounting update
show aaa accounting commands
aaa accounting commands
<privilege> stop-only tacacs+
[broadcast]
AAA Commands
DESCRIPTION
Displays what methods are used for authentication.
Displays the authentication method(s) for checking
privilege level of administrators.
Specifies which method should be used first, second, and
third for checking privileges.
method: enable, radius, or tacacs+.
Resets the method list for checking privileges to its default
value.
Displays the authentication methods for administrator login
accounts.
Specifies which method should be used first, second, and
third for the authentication of login accounts.
method: local, radius, or tacacs+.
Resets the method list for the authentication of login
accounts to its default value.
DESCRIPTION
Displays accounting settings configured on the Switch.
Display the update period setting on the Switch for
accounting sessions.
Sets the update period (in minutes) for accounting
sessions. This is the time the Switch waits to send an update
to an accounting server after a session starts.
Resets the accounting update interval to the default
value.
Displays accounting settings for recording command
events.
Enables accounting of command sessions and specifies
the minimum privilege level (0-14) for the command
sessions that should be recorded. Optionally, sends
accounting information for command sessions to all
configured accounting servers at the same time.
Ethernet Switch CLI Reference Guide
27
C
H A P T E R
4
M
P
E
3
E
3
C
14
C
14
E
3
C
14
C
14
M
P
E
3
E
3
C
13
C
13
E
3
C
13
Hide quick links:
Advertisement
Table of Contents
