Igmp Snooping Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

IGMP Snooping Commands

Use these commands to configure IGMP snooping on the Switch.
35.1 Command Summary
The following section lists the commands for this feature.
Table 90 igmp-flush Command Summary
COMMAND
igmp-flush
Table 91 igmp-snooping Command Summary
COMMAND
clear igmp-snooping statistics all
clear igmp-snooping statistics
port
clear igmp-snooping statistics
system
clear igmp-snooping statistics
vlan
igmp-snooping
no igmp-snooping
igmp-snooping 8021p-priority <0-7>
no igmp-snooping 8021p-priority
igmp-snooping authentication-
timeout <0-3000>
no igmp-snooping authentication-
timeout
igmp-snooping filtering
igmp-snooping filtering profile
<name> start-address <ip> end-
address <ip>
no igmp-snooping filtering
no igmp-snooping filtering profile
<name>
DESCRIPTION
Removes all multicast group information.
DESCRIPTION
Removes all multicast statistics of the Switch.
Removes the multicast statistics of the port(s).
Removes the multicast statistics of the Switch.
Removes the multicast statistics of the multicast VLAN(s) E
Enables IGMP snooping.
Disables IGMP snooping.
Sets the 802.1p priority for outgoing igmp snooping
packets.
Disables changing the priority of outgoing IGMP control
packets.
Sets how long the Switch waits before sending the
same access request again if the AAA server rejects the
host's request to join a multicast group.
Resets the authentication timeout value to its default
setting.
Enables IGMP filtering on the Switch. Ports can only join
multicast groups specified in their IGMP filtering profile.
Sets the range of multicast address(es) in a profile.
name: 1-32 alphanumeric characters
Disables IGMP filtering on the Switch.
Removes the specified IGMP filtering profile. You
cannot delete an IGMP filtering profile that is assigned
to any ports.
Ethernet Switch CLI Reference Guide
126
C
H A P T E R
35
M P
E 13
M P
E 3
E 3
E 3
3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13