ZyXEL Communications XS3800-28 Cli Reference Manual page 372

This example displays multicast VLAN configuration on the Switch.
sysname> show multicast vlan
Multicast Vlan Status
Index VID Type
----- ---- ----------
1 123 MVR
The following table describes the labels in this screen.
Table 239 show multicast vlan
LABEL
Index
VID
Type
This example shows the current status of Power over Ethernet.
sysname# show poe-status
Total Power (W)
Consuming Power (W)
Allocated Power (W)
Remaining Power (W)
The following table describes the labels in this screen.
Table 240 show poe-status
LABEL
Total Power
Consuming Power
Allocated Power
Remaining Power
This example looks at general system information about the Switch
Chapter 106 Additional Commands
DESCRIPTION
This field displays an entry number for the multicast VLAN.
This field displays the multicast VLAN ID.
This field displays what type of multicast VLAN this is.
MVR: This VLAN is a Multicast VLAN Registration (MVR).
Static: This VLAN is configured via IGMP snooping VLAN in fixed mode.
Dynamic: This VLAN is learned dynamically in auto mode.
See Chapter 35 on page 126
IGMP modes.
: 185.0
: 0.0
: 0.0
: 185.0
DESCRIPTION
This field displays the total power the Switch can provide to PoE-enabled devices.
This field displays the amount of power the Switch is currently supplying to the PoE-
enabled devices.
This field displays the total amount of power the Switch has reserved for PoE after
negotiating with the PoE device(s).
Note: If the management mode is set to Consumption, this field shows NA.
This field displays the amount of power the Switch can still provide for PoE.
Note: The Switch must have at least 16 W of remaining power in order to
supply power to a PoE device, even if the PoE device requested less
than 16 W.
Ethernet Switch CLI Reference Guide
372
for more information about IGMP snooping VLAN and