ZyXEL Communications XS3800-28 Cli Reference Manual page 217

57.2 Command Examples
This example shows the current MSTP configuration.
sysname# show mstp
(a)BridgeMaxAge:
(b)BridgeHelloTime:
(c)BridgeForwardDelay:
(d)BridgeMaxHops:
(e)TransmissionLimit:
(f)ForceVersion:
(g)MST Configuration ID
Format Selector:
Configuration Name:
Reveision Number:
Configuration Digest:
msti
-----------------------------
0
-----------------------------
The following table describes the labels in this screen.
Table 152 show mstp
LABEL
BridgeMaxAge
BridgeHelloTime
BridgeForwardDelay
BridgeMaxHops
TransmissionLimit
ForceVersion
MST Configuration ID
Format Selector
Configuration Name
Revision Number
Configuration Digest
msti
vlans mapped
Chapter 57 MSTP Commands
20
2
15
128
3
3
0
001349aefb7a
0
0xAC36177F50283CD4B83821D8AB26DE62
vlans mapped
1-4094
DESCRIPTION
This field displays the maximum time (in seconds) the Switch can wait without receiving
a configuration message before attempting to reconfigure.
This field displays the time interval (in seconds) at which the Switch transmits a
configuration message.
This field displays the time (in seconds) the Switch will wait before changing states (that
is, listening to learning to forwarding).
This field displays the number of hops (in seconds) in an MSTP region before the BPDU is
discarded and the port information is aged.
This field displays the maximum number of BPDUs that can be transmitted in the interval
specified by BridgeHelloTime.
This field indicates whether BPDUs are RSTP (a value less than 3) or MSTP (a value
greater than or equal to 3).
This field displays zero, which indicates the use of the fields below.
This field displays the configuration name for this MST region.
This field displays the revision number for this MST region.
A configuration digest is generated from the VLAN-MSTI mapping information.
This field displays the 16-octet signature that is included in an MSTP BPDU. This field
displays the digest when MSTP is activated on the system.
This field displays the MSTI ID.
This field displays which VLANs are mapped to an MSTI.
Ethernet Switch CLI Reference Guide
217
(seconds)
(seconds)
(seconds)