Multiple Login Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Multiple Login Commands

Use these commands to configure multiple administrator logins on the Switch.
58.1 Command Summary
The following section lists the commands for this feature.
Table 154 multi-login Command Summary
COMMAND
show multi-login
multi-login
no multi-login
58.2 Command Examples
This example shows the current administrator logins.
sysname# show multi-login
[session info ('*' denotes your session)]
index session
----- ---------- ---------------
1 telnet-d
* 2 telnet-d
The following table describes the labels in this screen.
Table 155 show multi-login
LABEL
index
session
remote ip
DESCRIPTION
Displays multi-login information.
Enables multi-login.
Disables another administrator from logging into Telnet or
SSH.
remote ip
172.16.5.15
172.16.5.15
DESCRIPTION
This field displays a sequential number for this entry. If there is an asterisk (*) next to the
index number, this entry is your session.
This field displays the service the administrator used to log in.
This field displays the IP address of the administrator's computer.
Ethernet Switch CLI Reference Guide
220
C
H A P T E R
58
M P
E 3
C 14
C 14