VLAN Trunking Commands
Use these commands to decide what the Switch should do with frames that belong to unknown VLAN
groups.
101.1 Command Summary
The following section lists the commands for this feature.
Table 226 vlan-trunking Command Summary
COMMAND
interface port-channel <port-
list>
vlan-trunking
no vlan-trunking
C
DESCRIPTION
Enters config-interface mode for the specified port(s).
Enables VLAN trunking on ports connected to other
switches or routers (but not ports directly connected to
end users). This allows frames belonging to unknown VLAN
groups to go out via the VLAN-trunking port.
Disables VLAN trunking on the port(s).
Ethernet Switch CLI Reference Guide
353
H A P T E R
101
M
P
C
13
C
13
C
13