Voice Vlan Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Voice VLAN Commands

Use these commands to set up Voice VLAN on the Switch.
102.1 Voice VLAN Overview
Voice VLAN ensures that the sound quality of an IP phone is preserved from deteriorating when the data
traffic on the Switch ports is high. It groups the voice traffic with defined priority into an assigned VLAN
which enables the separation of voice and data traffic coming onto the Switch port.
You can set priority level to the Voice VLAN and add MAC address of IP phones from specific
manufacturers by using its ID from the Organizationally Unique Identifiers (OUI).
See below commands and examples to set up the Voice VLAN.
102.2 Command Summary
The following section lists the commands for this feature.
Table 227 Voice VLAN Command Summary
COMMAND
voice-vlan <vlan-id>
voice-vlan priority <0-7>
voice-vlan oui <mac-addr> mask
<mask-addr> description
<description>
no voice-vlan
no voice-vlan oui <mac-addr>
mask <mask-addr>
show voice-vlan
C
DESCRIPTION
Sets the Voice VLAN ID.
Sets the Voice VLAN priority level.
Sets the Voice VLAN device's OUI address, mask address
and device manufacturer description.
Disables Voice VLAN configuration.
Removes the OUI from the Voice VLAN.
Show Voice VLAN status.
Ethernet Switch CLI Reference Guide
354
H A P T E R
102
M P
C 13
C 13
C 13
C 13
C 13
E 3