Procedures (Pfd); Operations - Garmin G1000 Pilot's Manual

GPS NAVIGATION

5.22 PROCEDURES (PFD)

The Procedures Window (Figure 5-92) provides direct access to departures, arrivals and approaches — based
upon the active flight plan or direct-to destination. In either case, the departure and destination airports must
have published procedures associated with them. The Procedures Window is displayed and removed by pressing
the PROC Key .

OPERATIONS

The following operations can be performed from the Procedures Window:
• Activate Vector-To-Final or approach
• Select approach, arrival, or departure
• Select missed approach
SELECT DEPARTURE
'Select Departure' selects a published standard instrument departure (SID) for the departure airport or
replaces the current departure with a new selection. When using a direct-to, the G1000 uses the nearest
airport as a reference when displaying available departures.
Available
Departures
5-110
Figure 5-94 Procedures Window
Figure 5-95 Selecting a Departure
Garmin G1000 Pilot's Guide for the Cessna Nav III
Available
Runways
Available
Transitions
190-00498-01 Rev. A