Garmin G1000 Pilot's Manual page 21

14 MENU Key – Displays a context-sensitive list of options. This list allows the user to access additional
features, or to make setting changes that relate to certain pages.
PROC Key – Selects approaches, departures and arrivals from the flight plan. If a flight plan is used, available
15
procedures for the departure and/or arrival airport are automatically suggested. If a flight plan is not used,
the desired airport and the desired procedure may be selected. This key selects IFR departure procedures
(DPs), arrival procedures (STARs) and approaches (IAPs) from the database and loads them into the active
flight plan.
ENT Key – Accepts a menu selection or data entry. This key is used to approve an operation or complete
16
data entry. It is also used to confirm selections and information entries.
Dual ALT Knob – Sets the selected altitude in the box located above the Altimeter. The large knob selects
17
the thousands, while the small knob selects the hundreds. Altitude Select is used by the Automatic Flight
Control System in certain modes, in addition to the standard G1000 Altitude Alerter function.
18 AP Key – (182 & 206 only) Engages/disengages the autopilot and flight director. Pressing the AP Key
activates the flight director and engages the autopilot in the default pitch axis and roll axis modes. Pressing
the AP Key again disengages the autopilot and deactivates the flight director.
19 HDG Key – (182 & 206 only) Selects/deselects Heading Select Mode.
NAV Key – (182 & 206 only) Selects/deselects Navigation Mode.
20
21 APR Key – (182 & 206 only) Selects/deselects Approach Mode.
VS Key – (182 & 206 only) Selects/deselects Vertical Speed Mode.
22
23 FLC Key – (182 & 206 only) Selects/deselects Flight Level Change Mode.
FD Key – (182 & 206 only) Activates/deactivates the flight director only. Pressing the FD Key turns on the
24
flight director in the default pitch axis and roll axis modes. Pressing the FD Key again deactivates the flight
director and removes the command bars, unless the autopilot is engaged. If the autopilot is engaged, the FD
Key is disabled.
25 ALT Key – (182 & 206 only) Selects/deselects Altitude Hold Mode.
VNV Key – (182 & 206 only) Selects/deselects Vertical Navigation Mode.
26
BC Key – (182 & 206 only) Selects/deselects Back Course Mode.
27
28 29 NOSE UP/NOSE DN Keys – (182 & 206 only) Controls the active pitch reference for the Pitch Hold,
Vertical Speed, and Flight Level Change modes.
190-00498-01 Rev. A Garmin G1000 Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
1-9