Garmin G1000 Pilot's Manual page 162

GPS NAVIGATION
Measuring bearing and distance between two points:
1) Press the MENU Key (with the Navigation Map Page displayed).
2) Highlight the 'Measure Bearing/Distance' field.
3) Press the ENT Key. An on-screen reference pointer is displayed on the map display at the aircraft's present
position.
4) Move the joystick to place the reference pointer at the desired location. The bearing and distance is displayed
at the top of the map display. Elevation at the current position is also displayed. Pressing the ENT Key changes
the starting point for measuring.
5) To exit the Measure Bearing/Distance option, push in the joystick or select 'Stop Measuring' from the page
menu.
6) Press the ENT Key.
Displaying Charts
ChartView and FliteCharts resemble the paper version of Jeppesen and NACO terminal procedures charts. The
charts are displayed in full color with high-resolution. See the Additional Features section for more information
on ChartView and FliteCharts.
5-26
Measure
Bearing/Distance
Option
Figure 5-18 Measure Bearing/Distance Option
Figure 5-19 'Show Chart' Option
Garmin G1000 Pilot's Guide for the Cessna Nav III
Navigation Map
Page Menu
190-00498-01 Rev. A