Garmin G1000 Pilot's Manual page 173

GPS NAVIGATION
Selecting a Direct-to Destination to a Recently Entered Identifier:
1) Press the Direct-to ( ) Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-34. The list
is populated only when navigating a flight plan.
Figure 5-34 Recently Entered Waypoints List
3) Turn the small FMS Knob to the right to display the 'RECENT' waypoints as shown in Figure 5-34.
4) Turn the large FMS Knob to select the desired airport.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
6) Press ENT again to activate a Direct-to.
190-00498-01 Rev. A Garmin G1000 Pilot's Guide for the Cessna Nav III 5-37