Garmin G1000 Pilot's Manual page 282

HAZARD AVOIDANCE
CELL AND STRIKE MODE ON THE NAVIGATION MAP
On the Navigation Map, cell mode identifies cells of lightning activity (Figure 6-39). Stormscope identifies
clusters of electrical activity that indicate cells. Strike mode indicates the approximate location of lightning
strikes.
Selecting the 'cell' or 'strike' mode on the Navigation Map:
1) Press the MENU Key.
2) With 'Map Setup' selected, press the ENT Key.
3) Select the 'Weather' group.
4) Press the ENT Key. The cursor flashes on 'STRMSCP LTNG'.
5) Turn the large FMS Knob to select 'STRMSCP MODE'.
6) Turn the small FMS Knob to change between 'CELL' and 'STRIKE' options. When an item is selected, press the
ENT Key.
7) Press the FMS knob to return to the Navigation Map Page.
6-30
Figure 6-38 Map Setup Menu
Garmin G1000 Pilot's Guide for Cessna Nav III 190-00498-01 Rev. A