User Waypoint Information (Mfd) - Garmin G1000 Pilot's Manual

GPS NAVIGATION

5.10 USER WAYPOINT INFORMATION (MFD)

OPERATIONS
Selecting the User WPT Information Page (Figure 5-47):
1) Select the NRST page group.
2) Select the fifth rectangular page icon.
Map of Surrounding
Area/User Waypoint
Location and Symbol
C U
REATING SER
User waypoints may be created from the User Waypoint Information Page or the Navigation Map Page.
To create a new user waypoint from the User Waypoint Information Page, enter the name (identifier) and
position, or reference another waypoint by radial and distance.
Creating a new user waypoint:
1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2) Enter a name for the new waypoint.
3) Press the ENT Key. The message 'Are you sure you want to create the new user waypoint' is displayed.
4) With 'YES' highlighted, press the ENT Key.
5) Highlight the latitude/longitude field or the Reference Waypoints field, depending on how the waypoint is to be
defined.
6) Enter the position coordinates or the radial and distance from the reference waypoint.
5-50
Figure 5-47 User WPT Information Page
W
AYPOINTS
Garmin G1000 Pilot's Guide for the Cessna Nav III
User Waypoint
Name and Symbol
Comment
Information
Reference Waypoints
User Waypoint List
Number of
Waypoint Slots
Used/Avaialble
190-00498-01 Rev. A