Garmin G1000 Pilot's Manual page 307

If data is not received for a period longer than six seconds, the age of the present data will be displayed in
the lower left of the screen along with the annunciation that the system has entered Coast mode. The system
will maintain the traffic display (up to 60 seconds) until the next data reception. If no data is received after 60
seconds, traffic will be removed from the display.
Surrounding Traffic
Traffic Display Banner
of All Possible System
Statuses
Displaying traffic on the Traffic Map Page:
1) Select the Map Page Group.
2) Select the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. 'TIS OPERATING' is displayed in the upper left corner of
the page. Alternatively, press the STANDBY Softkey to place the system in the Standby mode. 'TIS STANDBY'
displays in the upper left corner of the page.
4) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area
190-00498-01 Rev. A
Current Traffic
Mode
Surrounding Traffic
Figure 6-57 Traffic Map Page - General Information
Garmin G1000 Pilot's Guide for Cessna Nav III
HAZARD AVOIDANCE
Range
Marking
Rings
Surrounding
Traffic
6-55