Garmin G1000 Pilot's Manual page 147

Topo Scale
The topo scale setting enables or disables the topography range box located in the lower right corner
of the Navigation Map.
Enabling/disabling the topo range box:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group and press the ENT Key.
4) Highlight the 'TOPO Range' field.
5) Select 'On' or 'Off'.
6) Press the FMS Knob to return to the Navigation Map Page.
Terrain Data
Terrain data can be enabled or disabled on the Navigation Map Page using the 'TERRAIN DATA'
setting. A data range can also be selected. The data range is the maximum map range that terrain data is
displayed.
Enabling/disabling terrain data and to select a terrain data range:
1) With the Navigation Map Page displayed, press the MENU Key to display the Navigation Map Page Menu. The
cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'TERRAIN DATA' field.
6) Select 'On' or 'Off'.
7) Press the ENT Key to accept the selected option. The flashing cursor highlights the range field. TERRAIN ranges
are from Off to 2000 nm.
8) To change the TERRAIN range setting, turn the small FMS Knob to display the range list.
9) Select the desired range
10) Press the ENT Key.
11) Press the FMS Knob to return to the Navigation Map Page.
190-00498-01 Rev. A Garmin G1000 Pilot's Guide for the Cessna Nav III
GPS NAVIGATION
5-11