Garmin G1000 Pilot's Manual page 409

PRESETS
Up to 15 channels from any category can be assigned a preset number. The Preset channels are selected by
pressing the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to
the Channel List for the Presets category.
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Press the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Pressing the MORE Softkey repeatedly cycles through the preset channels.
3) Press any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
4) Press the SET Softkey on the desired channel number to save the channel as a preset.
Press SET to
Save Each
Preset Channel
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by pressing the VOL Softkey, which
brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, press the VOL Softkey.
2) Press the VOL – Softkey to reduce volume or press the VOL + Softkey to increase volume. (Once the VOL
Softkey is pressed, the volume can also be adjusted using the small FMS Knob.)
3) Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again to un-mute the audio.
190-00498-01 Rev A
Figure 8-59 Accessing and Selecting XM Preset Channels
Figure 8-60 Volume Control
Garmin G1000 Pilot's Guide for Cessna Nav III
ADDITIONAL FEATURES
Press PRESETS to
Access the Preset
Channels Softkeys
Press MORE to Cycle
Through the Preset
Channels
8-47