Garmin G1000 Pilot's Manual page 292

HAZARD AVOIDANCE
SETTING UP TERRAIN PROXIMITY ON THE NAVIGATION MAP PAGE
Use the Map Setup Window (Figure 6-46) to customize the display of obstacle and terrain data on the
Navigation Map Page. Data displays only if it is selected.
Customizing terrain and obstacle display on the Navigation Map Page:
1) On the Navigation Map Page, press the MENU Key.
2) While the 'Map Setup' selection is highlighted on the Page Menu, press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. To select the 'Map' group, turn the FMS Knob
and press the ENT Key.
4) While the Map Setup Menu is displayed, turn the large FMS Knob to highlight and move between the
selections.
5) When an item is highlighted, turn the small FMS Knob to select the desired option and press the ENT Key.
Table 6-7 shows the options for displaying terrain and obstacle data on the Navigation Map only. These
options do not apply to other maps.
Terrain Data
Refer to Table 6-6 for the altitude associated with obstacle and terrain colors.
6-40
Figure 6-46 Map Setup Window
Obstacle Data
OFF OFF
OFF ON
ON OFF
ON ON
Table 6-7 Obstacle and Terrain Data on the Navigation Map Page
Garmin G1000 Pilot's Guide for Cessna Nav III
Map Zoom Range at
Which Data Begins to
Display
Displayed on Navigation Map Page
No obstacles or terrain displayed
BLACK, YELLOW, and RED obstacles displayed
BLACK, YELLOW, and RED terrain displayed
BLACK, YELLOW, and RED obstacles and terrain displayed
190-00498-01 Rev. A