Auto-Tuning The Nav Frequency - Garmin G1000 Pilot's Manual

AUTO-TUNING THE NAV FREQUENCY

NAV frequencies can be selected and loaded from the following MFD pages:
• WPT – Airport Information
• WPT – VOR Information
• NRST – Nearest Airports
The MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroute
navigation, the NAV frequency is entered automatically into the NAV standby frequency field. During approach
activation the NAV frequency is entered automatically into the NAV active frequency field.
Frequencies can be automatically loaded into the NAV Frequency Boxes by highlighting the frequency and
pressing the ENT Key (Figures 4-25, 4-26, and 4-27).
Auto-tuning from the MFD:
1) From any page that the NAV frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired NAV identifier.
3) Press the FREQ Softkey to place the cursor on the NAV frequency (Figure 4-27).
4) Press the ENT Key to load the NAV frequency into the standby field of the selected NAV radio.
5) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.
Turn the FMS
Knob to Scroll
Through a List
of Frequencies
190-00498-01 Rev A
Press the ENT
Key to Load
a Highlighted
Frequency into
the NAV Standby
Frequency Box
Figure 4-25 NAV Frequency Auto-Tuning from the MFD
Garmin G1000 Pilot's Guide for Cessna Nav III
AUDIO PANEL AND CNS
• NRST – Nearest VOR
• NRST – Nearest (WX, VOR) Frequencies
• NRST – Nearest Airspaces
4-19