Garmin G1000 Pilot's Manual page 77

DME INFORMATION WINDOW
Refer to the Audio Panel and CNS Section for information on tuning the radios.
NOTE:
DME radio installation is optional.
NOTE:
The DME Information Window (labeled 'DME'; see Figure 2-28) is displayed above the BRG1 Information
Window and shows the tuning mode (NAV1, NAV2, or HOLD), frequency, and actual DME distance. When
a signal is invalid, the distance is replaced by "–.– – NM".
Displaying the DME Information Window:
1) Press the PFD Softkey.
2) Press the DME Softkey to display the DME Information Window above the BRG1 Information Window.
3) To remove the DME Information Window, press the DME Softkey again.
DME Information Window
Distance to
Bearing Source
Bearing Pointer
Source
Bearing 1 Information Window
190-00498-01 Rev. A
Tuning Mode
Frequency
Distance
Station
Identifier
Icon
Figure 2-28 HSI with Bearing and DME Information
Garmin G1000 Pilot's Guide for Cessna Nav III
Bearing 1 Bearing 2
Pointer Pointer
FLIGHT INSTRUMENTS
No
Waypoint
Selected
Pointer Bearing
Icon Source
Bearing 2 Information Window
2-19