Garmin G1000 Pilot's Manual page 34

SYSTEM OVERVIEW
TRAFFIC
TOPO
TERRAIN
STRMSCP
NEXRAD
XM LTNG
PFD
METRIC
DFLTS
WIND
DME
BRG1
360 HSI
ARC HSI
BRG2
STD BARO
OBS
CDI
DME
XPDR
STBY
ON
ALT
GND
VFR
CODE
1-22
Displays traffic information on Inset Map
Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and
elevation scale on Inset Map
Displays terrain information on Inset Map
Displays Stormscope® information on Inset Map
Displays NEXRAD weather and coverage information on Inset Map (optional
feature)
Displays XM lightning information on Inset Map (optional feature)
Displays second-level softkeys for additional PFD configurations
Displays current and Selected Altitudes in meters, in addition to feet; also
changes barometric setting to hectopascals (hPa) from inches of mercury
(in Hg)
Resets PFD to default settings, including changing units to standard
Displays softkeys to select wind data parameters
OPTN 1 Longitudinal and lateral components
OPTN 2 Total direction and speed
OPTN 3 Total direction with head and crosswind speed components
OFF Information not displayed
Displays the DME Information Window
Cycles the Bearing 1 Information Window through NAV1, GPS/ waypoint
identifier and GPS-derived distance information, and ADF/frequency
Displays the HSI in a 360 degree view
Displays the HSI as an arc
Cycles the Bearing 2 Information Window through NAV2 or GPS waypoint
identifier and GPS-derived distance information, and ADF/frequency.
Sets barometric pressure to 29.92 in Hg (1013 hPa if METRIC softkey is
selected)
Selects OBS mode on the CDI when navigating by GPS (only available with
active leg)
Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI
Displays the DME Tuning Window, allowing selection of the DME
Displays transponder mode selection softkeys
Selects standby mode (transponder does not reply to any interrogations)
Selects Mode A (transponder replies to interrogations)
Selects Mode C – altitude reporting mode (transponder replies to identification
and altitude interrogations)
Allows manual selection of ground mode in certain conditions
Automatically enters the VFR code (1200 in the U.S.A. only)
Displays transponder code selection softkeys 0-7
Garmin G1000 Pilot's Guide for Cessna Nav III 190-00498-01 Rev. A