Garmin G1000 Pilot's Manual page 413

CAUTION ALERTS
CAUTION ALERTS (T182, T206, AND 206 WITH PROP DE-ICE ONLY)
SAFE OPERATING ANNUNCIATION (T182, T206, AND 206 WITH PROP DE-ICE ONLY)
CO GUARDIAN MESSAGES
G1000 SYSTEM ANNUNCIATIONS
When a new alert is issued, the ALERT Softkey will flash to alert the pilot of a new message. It will continue
to flash until acknowledged by pressing the softkey. Active alerts are displayed in white text. Alerts that have
become inactive will change to gray text. The ALERT Softkey will flash if the state of a displayed alert changes
or a new alert is displayed. The inactive alerts can be removed from the Alert Window by pressing the flashing
ALERT Softkey.
The G1000 System Messages convey messages to the pilot regarding problems with the G1000 system. When
an LRU or an LRU function fails, a large red 'X' is typically displayed on windows associated with the failed data.
The following section describes various system annunciations. Refer to the POH for additional information
regarding pilot responses to these annunciations.
190-00498-01 Rev. A
Annunciation Window Text
LOW VACUUM
LOW FUEL L
LOW FUEL R
STBY BATT
Annunciation Window Text
PROP HEAT
Annunciation Window Text
PROP HEAT
Alerts Window Message
CO DET SRVC – The carbon
monoxide detector needs
service.
CO DET FAIL – The carbon
monoxide detector is inopera-
tive.
Garmin G1000 Pilot's Guide for Cessna Nav III
Audio Alert
Single Aural Tone
Single Aural Tone
Single Aural Tone
Single Aural Tone
Audio Alert
Single Aural Tone
Audio Alert
No Tone
Comments
There is a problem within
the CO Guardian that
requires services.
Loss of communication
between the G1000 and
the CO Guardian.
APPENDIX A
A-3