GPS NAVIGATION
OR:
1) From the Approach Loading Page Window, highlight the 'CHANNEL' field (Figure 5-93).
2) Enter the desired channel number.
3) Press the ENT Key. The TRANSITION window is displayed.
4) Select a transition (the 'VECTORS' option assumes vectors will be received to the final course segment of the
approach and will provide navigation guidance relative to the final approach course).
5) Press the ENT Key.
6) Highlight 'LOAD?' or 'ACTIVATE?'. 'LOAD' adds the approach to the flight plan without immediately using the
approach for navigation guidance. This allows for the original flight plan to continue navigating until cleared for
the approach, but keeps the approach available for quick activation when needed. 'Activate' adds the approach
to the flight plan and begins navigating the approach course.
5-108
WAAS Channel
Number
Figure 5-93 WAAS Channel Selection
Garmin G1000 Pilot's Guide for the Cessna Nav III
190-00498-01 Rev. A