Garmin G1000 Pilot's Manual page 37

MFD SOFTKEYS
ENGINE
LEAN
SYSTEM
MAP
TRAFFIC
TOPO
TERRAIN
NEXRAD
XM LTNG
BACK
190-00498-01 Rev. A
Pressing this softkey makes available the LEAN and SYSTEM
Pressing makes available the CYL SLCT and ASSIST Softkeys
CYL SLCT The Cylinder Select Softkey cycles through selection of each
ASSIST Pressing the ASSIST Softkey causes the first cylinder that peaks
BACK Returns to the previous level softkeys
Press this softkey to make available the RST FUEL and GAL
RST FUEL Pressing the Rest Fuel Softkey resets fuel used and gallons
GAL REM Press this softkey (Gallons Remaining) to display the quantity
-10 GAL Pressing decreases the fuel remaining quantity in 10 gallon
-1 GAL Pressing decreases the fuel remaining quantity in 1 gallon
+1GAL Pressing increases the fuel remaining quantity in 10 gallon
+10 GAL Pressing decreases the fuel remaining quantity in 10 gallon
XX GAL Pressing this softkey sets the fuel remaining to the quantity at
XX GAL Pressing this softkey sets the fuel remaining to the full tank
Enables second-level Navigation Map softkeys
Displays traffic information on Navigation Map
Displays topographical data (e.g., coastlines, terrain, rivers,
Displays terrain information on Navigation Map
Displays NEXRAD weather and coverage information on
Displays XM lightning information on Navigation Map
Returns to top-level softkeys
Garmin G1000 Pilot's Guide for Cessna Nav III
Softkeys
to facilitate engine leaning
cylinder indicated by changing the cylinder display to light
blue
to become highlighted and information for that cylinder to
be displayed
REM Softkeys
remaining to zero
adjustment softkeys
increments
increments
increments
increments
the filler neck tab where XX is an airframe specific quantity
quantity where XX as an airframe specific quantity
lakes) and elevation scale on Navigation Map
Navigation Map (optional feature)
(optional feature)
SYSTEM OVERVIEW
1-25