Selecting A Nav Radio; Nav/Com Tuning; Intercom - Garmin Beechcraft 200 Series Cockpit Reference Manual

nav/Com/xpdr/audio panel
receive only
Press the COM1, COM2, or COM3 Key (optional COM, if installed) on the
audio panel.

seleCting a nav radio

1) Press the CDI Softkey to select NAV1 (VOR1/LOC1) or NAV2 (VOR2/LOC2).
2) Pressing the NAV1 , NAV2 , DME , or ADF Key on the audio panel selects
and deselects the navigation radio audio source. All radio keys can be
selected individually or together.

nav/Com tuning

1) Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.

interCom

Pressing the INTR COM Key on either Audio Panel selects and deselects the
intercom on both Audio Panels. The annunciator is lit when the intercom is active.
The intercom connects the pilot and copilot together. Either the pilot or copilot may
select or deselect the intercom.
The CABIN Key initiates two way communication between the pilot or copilot and
the passengers in the cabin. The annunciator is lit when the cabin intercom is active
on either Audio Panel.
The MAN SQ Key allows either automatic or manual control of the intercom
squelch setting. Pressing the MAN SQ Key enables manual squelch control, indicated
by the MAN SQ annunciator.
During manual squelch operation, pressing the ICS Knob switches between volume
and squelch adjustment, lighting the associated annunciator beneath the knob. When
the MAN SQ annunciator is lit, the ICS Knob controls both volume and squelch. When
the MAN SQ annunciator is extinguished, the ICS Knob controls only volume.
6
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-00 Rev. A